Electronics FC-24 Uživatelský manuál stáhnout pdf (Strana 10)

10. MAINTENANCE

There is no maintenance required for the FC-24 controller.

Power: 24 Vdc @ 0.5 Amp

Inputs: 0-5 A ac from current transformer loop

Remote analog setpoint 0-10 Vdc

Enable input 24 Vdc

Alarm reset 24 Vdc

Outputs: Servo output signal 0-10 Vdc

Recorder Analog output 0-10 Vdc

Alarm relay contacts (rated at 120 Vac @ 0.5 Amp)

Enable output signal 24 Vdc

Weight: 2.2 pounds / 1 Kg

Display range: 0-1999

Decimal Points: 1000, 100.0, 10.00

Alarm Bandwidth: 0-50% of full scale or of set point

Alarm Delay: 0-10 seconds

Enable Delay: 0-10 seconds

0 Vdc, Common 0 Vdc, Common 11

Remote Setpoint (0-10 Vdc) Alarm Reset (24 Vdc)

0 Vdc, Common Alarm High Relay Contact

Enable Input (24 Vdc) Alarm Common Relay Contact

0 Vdc, Common

Alarm Low Relay Contact

Process Input (0-10 Vdc)

Flow “OK” Relay Contact

Process Input (0- 0.5 Vac)

0 Vdc, Common

Servo Output (0-10 Vdc) Recorder Output (0-10 Vdc)

Enable Output (24 Vdc) 24 Vdc Power

0 Vdc, Common 0 Vdc, Common

1 2 ... 5 6 7 8 9 10 11 12

Žádné komentáře

Electronics FC-24 Uživatelský manuál Strana 10