Electronics 500-24 Uživatelský manuál

Instruction Manual MAGNAVALVE FOR WHEEL BLAST MACHINE SHOT FLOW CONTROL 500-24xx MagnaValve IM:0091 Revision: C Date: 11/19/2009 Made in the USA

2 PRODUCT DESCRIPTION 3 THEORY OF OPERATION 3 LOCATION OF ADJUSTMENTS 3 PRELIMINARY ADJUSTMENTS 3 INSTALLATION 3 OPERATION 4 CALIBRATION 4 SP

3 1. PRODUCT DESCRIPTION The 500-24xx Series of MagnaValves are designed to regulate the flow of steel shot or grit in abrasive blast cleaning and s

4 c. Input Signal – The analog 0-10 Vdc input signal must be above 0.25 Vdc as a minimum flow command signal. For additional information about the

5 Valve Pulse – This is the rate at which the valve dispenses shot, similar to a heart beat rate. It is factory set to match the best flow characteri

6 Note: The MagnaValve is designed to operate vertically must be mount-ed within 5 degrees of vertical. 1234561. WHITE2. RED3. GREEN4. ORANGE5. BLACK